din 41612 type g connectors manufacturer can be used in environments with water to provide safe and reliable connectors, of which it is extremely important to achieve waterproof effect. So what do din 41612 type g connectors manufacturer need to pay attention to during installation and use?

1, according to the need for cable joint model specifications to buy the appropriate joint material, now the quality of cable joint material is also uneven, but in order to ensure the quality of cable joint, it is recommended not to covet cheap to choose the quality of reliable cable joint manufacturers of materials.

2, do not choose rainy days when the cable joint, because the cable water will seriously affect the service life of the cable, and even short circuit accidents will occur in serious cases.

3, be sure to read the manufacturer's product specifications carefully before making din 41612 type g connectors manufacturer, this is particularly important for 10kV and above cables, before doing all the processes to do.

4, more than 10kV single-core armored cable terminal connector, remember to only one end of the steel belt ground.

5, copper pipe pressing can not be too hard, as long as the press can be pressed to the position, the copper end face after crimping is bound to have a lot of raised points, this must be filed with a file, can not leave any burrs.

6. When using the blowtorch, pay attention to the blowtorch moving back and forth, not only in one direction and constantly blowtorch.

7, the size of the cold shrink cable joint must be done in strict accordance with the drawing instructions, especially when extracting the support in the reserved pipe, more care should be taken.

din 41612 type g connectors manufacturer https://www.kujunconnector.com/TYPE-G-Connectors