Namely, it replaces the rear axle-back and tips and then a portion of what we refer to as the mid-pipes. This system is emissions friendly and doesn’t require any tuning. In New Jersey, vehicles must pass emissions testing to ensure they meet environmental standards. Since cat-back exhaust systems do not modify the catalytic converter or engine management system, they generally do not affect a vehicle’s ability to pass emissions testing.

This will improve the throttle response and acceleration in naturally-aspirated cars. The same reaction will be found in cars with forced induction with the addition of less turbo lag or supercharger response. Cat-Back exhaust systems are the most popular, coveted, and sought-after modification that enthusiasts will initially perform because of the main reason, and that is the sound. All of the brands we carry offer exhaust systems that are the result of decades of research and development.

Considering cat-back exhausts replace more restrictions, they typically offer increased performance and noise compared to axle-back systems; however, they’re also more complicated to install…and more expensive. Every gear head is always looking to upgrade their car’s performance, sound, and look. One quick solution to all three of these aspects is a cat back exhaust system. A cat back exhaust is an exhaust system modification that increases airflow and look. "Cat back" refers to the parts of the exhaust system behind the catalytic converter (where the "cat" in the name comes from).

Therefore, they are placed as close to the engine as possible, or one or more smaller catalytic converters (known as "pre-cats") are placed immediately after the exhaust manifold. Founded in 1988, Steeda is the leader in Ford performance products. We specialize in the engineering and manufacturing of parts for the Ford Mustang, Bronco, Bronco Sport, Explorer, Escape, Fusion, Focus, Fiesta, Ford Trucks, and more!

There is a range of muffler types you can choose from with a cat back exhaust system with most people opting for a glasspack or straight-through muffler. Both of these options are designed to work well within the system to reduce back pressure. Deciding to purchase a performance exhaust system for your car is no easy task.

Typically, that includes a mid-pipe, muffler, tailpipe and tips. Cat-backs generally yield increases in performance, due to the more efficient flow of exhaust through upgraded parts like larger diameter tubing and better flowing mufflers, as well as improved sound and reduced weight. For starters, the "cat" in catback exhaust system is short for "catalytic converter", a central part of your car’s emission control system, which cat back exhausts are fitted behind, hence the "back". This relatively simple mod helps to free up exhaust gas flow and improve the noise of your engine by swapping out part of your exhaust system with a specially designed car performance exhaust system. These three reactions occur most efficiently when the catalytic converter receives exhaust from an engine running slightly above the stoichiometric point. For gasoline combustion, this ratio is between 14.6 and 14.8 parts air to one part fuel, by weight.

Although phosphorus is no longer used in gasoline, it (and zinc, another low-level catalyst contaminant) was widely used in engine oil antiwear additives such as zinc dithiophosphate (ZDDP). Beginning in 2004, a limit of phosphorus concentration in engine oils was adopted in the API SM and ILSAC GF-4 specifications. Although catalytic converters are most commonly applied to exhaust systems in automobiles, they are also used on electrical generators, forklifts, mining equipment, trucks, buses, locomotives, motorcycles, and on ships. They are even used on some wood stoves to control emissions.[5] This is usually in response to government regulation, either through environmental regulation or through health and safety regulations. Custom setups, especially for vehicles that do a lot of off-roading are also available.

Glasspack mufflers do not have extra sound-absorbing material. So, in order to absorb sound, they use the glass layer and packing. But if you are making your order on partcatalog.com, you can always inquire about the recommended tube diameter for your exhaust system by providing your make and model. This can lead to a significant decrease in torque and horsepower as well as rpm.

Each cat-back exhaust system is made from high quality components and assembly so you can get the performance you want at a price you can afford with the assurance you need. Please note Quad Tips are available with optional Carbon RR Racing Tips! (see photo of our new tips in the image library for this product)This is our signature full cat-back exhaust system for Lexus ISF.

Let’s look at the top ten reasons why a cat back exhaust system may be right for you. While a cat-back exhaust system includes all components from the catalytic converter to the exhaust tips, an axle-back system only replaces parts from the rear axle to the tips. Axle-back systems are generally easier to install and less expensive but offer more limited performance improvements and sound changes compared to cat-back systems. All our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research & development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements.

Different exhaust systems offer different noise levels and tones, but how? Sound quality and overall loudness of an exhaust system can vary significantly depending on the pipe diameter, size and design of the muffler, resonator inclusion, and the number of outlets. For this reason, all systems sold on RealTruck are filtered by noise level, including loud, moderate, and quiet. From the factory, most manufacturers employ small-diameter piping, restrictive mufflers, and noise-reducing resonators, significantly smothering exhaust flow and sound quality. A front pipe back system replaces a few key components of the OEM Honda or Acura exhaust found on your EX, Touring, Si, or A-Spec that are after the Front Pipe (the pipe that goes under the engine).

Because the engine won’t generate as much fumes and doesn’t need to work as hard to eliminate or minimize the fumes, your car will run better, saving you mileage. A benefit like this will improve the longevity of your car and even save you money at the gas pump. At Bradley’s Auto Service in Red Bank, NJ, we can build a completely custom exhaust system for your vehicle, including cat-backs. We will work with you to create your exhaust exactly the way you want it, with any combination of look, sound, feel, power, or muffler at your fingertips.

#19680 includes all the hardware necessary for do-it-yourself installation. Extensive testing on our in-house dyno has been used to ensure this SPEQ Series truck exhaust system not only sounds impressive but also has the performance bite to match its newfound bark. Consent to receive text messages for these purposes is not a condition of any purchase, service, or sweepstakes entry. So, if you are okay with the sound and performance then you have no need to replace your original exhaust system. OEM exhaust systems on the other and have crush-bent tubing made of normal steel.

This is a direct drop-in and can be installed at home or at the shop. That’s why we carry a wide lineup of sport exhaust systems, from individual pieces to full kits, made by some of the best manufacturers in the industry. We take exhaust so seriously that we also make our own branded exhaust systems in our own facility. We use 304 stainless steel for extra durability and life, and ensure every component is forged to fit your vehicle. Cat-back exhaust systems have more efficient gas flow, yielding increased engine performance, thanks to their larger exhaust tubes and mandrel bends. As a result, your car will be able to breathe better and produce more power.

All joints are hand TIG welded using precise fixtures and tooling. We take great pride in knowing your new exhaust will sound remarkable and stand the test of time. Stand out from the crowd with oversized 90mm quad slash-cut exhaust tips. These aggressive-looking tips fill the factory exhaust cutouts for that high-end sporty look. Over 20 years of expertise have cemented TruBendz's reputation for excellence. Our commitment to high-quality materials and craftsmanship ensures that you get the best bang for your buck.

This style of clamp design is popular in high-end OE applications and is known for long-term reliability. You can change the look of your Jeep too, with everything from polished stainless steel to full black exhaust kits, you can pick just the right look for your jeep. Depending on the year of your Jeep you might even be able to get a single or dual exit exhaust. You can choose your favorite exhaust system from our three collections, the GRiP Exhaust, N-II Exhaust, or the DT-S Exhaust.

We use the latest, advanced equipment to ensure precise and accurate adjustments. Each of the trucks will be included in Shelby's official registry. Revology's '68 Shelby GT500KR surpasses the performance of the original with a 710hp supercharged Ford/Roush Performance 5.0L Ti-VCT Coyote DOHC V8 engine. In 1962 Carroll Shelby, one of America's greatest race car drivers began a new chapter in his storied career with the legendary Cobra sports car. A piece of of this sports car's "DNA" is part of every subsequent Shelby vehicle.

Our straight-through brushed-finished mufflers are configurable to your desire, smoothing the exhaust note to a deep growl, without adding restrictions, rasp or drone. Strong high-quality bracketry and OEM-style clamps hold the system steadily in place, making the install or removal a snap, and fitment simple, yet precise. A cast 3" to dual 2.5" rear splitter creates an ultra-smooth transition, steadily feeding exhaust gasses out of the system, while looking tidy from under the rear bumper. Finally, removable 4" polished slash-cut exhaust tips finish the system, adding a classy motorsport-inspired touch to the rear of the vehicle. In addition to high-quality materials and components, the design of each high-performance exhaust system allows for easy, bolt-on installation right out of the box. CORSA exhausts require no welding and can mount directly to your factory connections.

Your engine’s performance and acceleration are then increased. The mandrel-bent tubing reduces the level of back pressure in the exhaust manifold as the larger diameter reduces restriction to the flow of exhausts. REMARK is an exhaust system manufacturer specializing in producing high quality, hand crafted exhaust components and systems for a range of vehicles. All products are made from 304L "Aircraft" Grade stainless steel. Milltek's 3.15" (80.00mm) Sport Catback Exhaust System has multiple tip options in Polished, Cerakoke Black, Brushed Titanium, Burnt Titanium and Carbon fiber. You get the only the best with SPD's 3" resonator 2011 f250 egr delete kit pipes. These 304 stainless steel pipes are ..

Another difference is with the material used in the cat-back exhaust system against that in stock exhaust systems. But the problem with a resonator is that it can cause restriction to the flow of the exhausts. In the end, this can end up lowering your vehicle’s performance. It is also more affordable and easier to install than other types of exhaust systems, including the cat-back exhaust system. Cat-back and axle-back exhaust systems are both aftermarket exhaust systems. A performance exhaust system, like the cat-back exhaust, allows for easy splitting into dual exhaust.

The products of REMUS Innovation Forschungs- und Abgasanlagen Produktions GmbH („REMUS") are distributed worldwide. This applies equally to products approved in Austria, which are subsequently manipulated, modified, edited or otherwise interfered or changed by the respective buyer, so that it no longer has its original condition. Discover MagnaFlow's latest evolution in performance exhaust technology. Stainless steel is the most popular choice for cat backs because it is durable and has a deep, throaty sound. But if you're looking for something lighter weight, you can also find cat backs made out of titanium. So, when it comes time to choose the right cat back for your car, keep these three things in mind and you'll be sure to find the perfect fit.

Most designs of the time therefore included secondary air injection, which injected air into the exhaust stream. This increased the available oxygen, allowing the catalyst to function as intended. Cat-back exhaust systems replace every component behind the catalytic converter, including most piping, mufflers, resonators, and tailpipes.

We match the exit size to the size exhaust you ordered, so if you are ordering this after the fact, please include the exhaust size you have in your order. Replaces the OEM catalytic converter with a free flowing pipe. Completely straight through (no bottleneck), free flowing mini-muffler and pipe. Replaces the OEM catalytic converter with a 3" metal substrate core high-flow performance cat and our mini muffler. The metal core is our highest flowing cat available and it will reduce... Rae is a very small 1000sqft shop, run by a dedicated team of two. Our motto, "Quality over quantity," drives everything we do and ensures the highest standards in every order.

Since 2003, we have specialized in building BMW M-models (and Tesla) with a refined selection of industry-leading, high quality products. Our 8,000 sq/ft installation facility and shipping headquarters is located in Anaheim, California. IE's advanced DroneTrap technology captures the pulse waves responsible for your B9 3.0T engine's exhaust note and draws them into dual mathematically tuned resonators. The internal ports are engineered to resonate these waves against each other in a process that selectively cancels out those responsible for annoying drones.

You also need to be careful when tightening the bolts on the cat back. Over-tightening can damage the system, so just make sure they're tight enough to hold everything in place. It's important to make sure that the cat back is properly aligned with the exhaust pipe. If it's not, you could end up with an inefficient or even dangerous exhaust system. Competitors often rely on generic silencers or gimmicks that claim to cut out drone without any real knowledge or development involved.

To maintain catalyst efficiency, the air–fuel ratio must stay close to stoichiometric and not remain rich or lean for too long. All of Milltek's performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that Milltek's products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. If you are looking for something a little more unique, you can opt for a split rear or custom cat back exhaust system design. The split models feature an exhaust pipe that, as the name suggests, splits into two side-by-side pipes at the end, often with polished muffler and exhaust tips to really make a visual impact. The wider pipes of a cat back exhaust system mean that your vehicle is able to breathe better.

We develop solutions to common issues that still trip up our competitors. For instance, we recently upgraded our Ford Maverick exhaust system offerings to include AWD and FWD configurations. President and founder, Gale Banks, began at age 14 with an engine teardown of his mother's '31 Ford Model A that resulted in an increase of 65 hp for a total of 105 hp.

But with so many options available, it's easy to get lost in the world of aftermarket exhaust systems. While some companies may try to lure customers with an attractive price tag or flashy branding, it's quality of performance, sound, and construction that truly sets a great brand like Invidia apart from the rest. Transform your vehicle with the Roush Performance F-150 Cat-back Exhaust System, an ideal replacement for your factory exhaust system. Crafted from robust, corrosion-resistant T-304 stainless steel, this system features high-flow mandrel bends to enhance exhaust flow efficiency. Experience the thrill of enhanced acoustics and performance with this premium upgrade for your F-150. Banks patented exhaust systems enhance power, fuel economy, and sound by removing all airflow restrictions.

Shelby American is pushing the latest generation Shelby GT500SE supercar to new levels. As the first Carroll Shelby Signature Edition version for this model, the car delivers sizzling styling, razor sharp handling and an additional 40 horsepower. The 2024 Shelby Super Snake is the pinnacle of our performance cars based on Ford's next generation S650 Mustang sports car. Gases are pulled from the cylinder head by the exhaust manifold, at which point they are removed via the exhaust at the rear of the vehicle.

The only difference is that it features straight perforated pipes. The original exhaust systems focus more on just reducing the sound and not shaping it to give it that desired deep growl. One function shared with both the axle-back and the cat-back exhaust systems are shaping your vehicle’s tone.

This is the 3rd Gen Toyota Tundra Borla S-Type Cat Back Exhast with Chrome Dual Tips. Borla manufacturers some of the best Toyota Exhaust systems, and this S-Type 2022+ Tundra Exhaust is no different, featuring the Merge X-Pipe for increased performance adn improved sound. The Carven-R series Performance Muffler delivers an aggressive sound with a refined tone. This unique pack-less (Patent# D802,507) muffler design is one of its kind. Stand out from the crowd with a performance exhaust system that sounds great. Save big on that signature MBRP sound during Pick Up Your Sound.

An upstream air injection point, ahead of the catalytic converter, is also sometimes present to provide additional oxygen only during the engine warm up period. This causes unburned fuel to ignite in the exhaust tract, thereby preventing it reaching the catalytic converter at all. This technique reduces the engine runtime needed for the catalytic converter to reach its "light-off" or operating temperature. Many vehicles have a close-coupled catalytic converter located near the engine's exhaust manifold. The converter heats up quickly, due to its exposure to the very hot exhaust gases, enabling it to reduce undesirable emissions during the engine warm-up period.

Don’t deny yourself the perfect blend of sound and performance any longer. Give our team a call today for a cat-back exhaust system that will unleash the potential of your Maverick. I'm very pleased with this [Thermal R&D] exhaust on my Maverick. Loud enough to let the people around you know you have an exhaust but not so loud as to wake up your neighbors at 4 am. During cruising you can barely hear it inside but it wakes up when you step on it. Definitely not obnoxious but gives the truck a performance sound.

We want to make sure the part fits your specific vehicle so we need a little more information from you. You can find out by inspecting the emissions sticker that is located in your engine compartment.

Beyond these incremental advantages, there’s not much to tell cat-back and regular exhausts apart, as they are commonly made from the same types of materials in roughly the same shape. Most newer vehicles have electronic fuel injection systems, and do not require air injection systems in their exhausts. Instead, they provide a precisely controlled air-fuel mixture that quickly and continually cycles between lean and rich combustion. Depending on your make and model, cat back exhaust systems can lead to an increase in fuel economy. The engine doesn’t have to work as hard pushing exhaust gases through the piping which reduces its load and leads to higher efficiency and MPG. For car enthusiasts and performance drivers, upgrading the exhaust system of a vehicle is a no-brainer.

When used in the context of aftermarket parts or performance upgrades, "cat-back" is used to indicate which section of the exhaust system the parts replace. Cat-back systems are available as both single- and dual-exhaust. All Thermal R&D exhausts are built right here in the USA out of the highest quality materials. Depending on these variables, installing a less restrictive exhaust on your Maverick can improve horsepower by about three to five percent. At Thermal R&D Performance, we have been producing and perfecting aftermarket exhausts for decades.

You get the only the best with SPD's 3" resonator delete pipes. These aluminized steel pipes are 3" .. SPD's high performance resonator cat-back pipe replaces your factory resonator pipe with a true 3" p.. The welds and craftsmanship are top notch, and the tips look perfect.

Even a small leak can cause problems down the line, so it's better to be safe than sorry. By following these simple tips, you can ensure that your cat back installation goes smoothly and without any issues. When it comes to cat back installation tips, there are a few things you need to keep in mind.

At Euro Car Parts, we have exhaust parts to help you do just that. It is important to note that the fuel saving will be more noticeable when traveling at freeway speeds than city driving, but if you spend a lot of your day on the road, you’ll likely notice the difference. View our technical tips to help you install, learn about and maintain your exhaust system the right way.

A catback exhaust system works by replacing the muffler and tailpipe with a more free-flowing design. Take full advantage of everything we have to offer with an upgraded CORSA exhaust. CORSA full exhaust systems help optimize performance and increase sound and will make heads turn in your direction every time you pass by. With our patented RSC® technology and unmatched customer experience, you'll see why we've been leaders of our industry for over 25 years. View our entire selection today, and find the CORSA exhaust that will leave your rides unrecognizable. If you have any questions about our high-performance exhausts, don't hesitate to reach out.

There are several factors to consider when selecting an exhaust system for your vehicle, including noise level, finish, price, style, and installation difficulty. As you move through the versions here, you’ll notice that the more complete the system, the more expensive it becomes. In exchange, you'll get more performance and sound benefit out of the system. To sweeten the pot, our exhausts come with significant savings once you start bundling multiple pieces together.

Less restrictive catalytic converters paired with a cat-back exhaust system will offer high performance and power. Though, the level of horsepower gained is not constant across all cat-back systems. It depends on the quality and performance of the catalytic converters. Because of the better flow of exhausts resulting from the mandrel-bent tubing and the larger diameter piping, cat-back exhaust systems manage to offer better performance. IE offers catback, downpipe, and midpipes upgrades to replace individual sections of your exhaust. Installing variations of these parts allows you to dial in your exhaust volume to your preference, from sporty to aggressive.

Installation was super easy, and did it myself with only ramps. When IE claims 'no-drone' they really mean it - the sound is perfect! The youtube videos do not do a good job capturing the sound quality, but trust me, it's the best overall setup for your car at a reasonable price point. Enjoy a tuned and enjoyable exhaust note without any raspy leaks ruining the show. Our exhaust system assembles with our wide-width stretch clamps designed to seal and pull your exhaust connections together.

Typically, this includes the pipe connecting the pipe from the catalytic converter to the muffler, the muffler, and the tailpipe or exhaust tips. Because these types of exhaust systems are installed after the emissions monitoring systems of a vehicle, they won’t impede its ability to measure emissions. However, you must be aware of your local noise regulations and adhere to them. With relatively short install times when using a high-quality system from MagnaFlow, exhaust modifications can yield the instant gratification of your ride sounding as fast as it looks. When you purchase an aftermarket exhaust system like a cat-back exhaust, you're in control of horsepower and sound output as pipe diameter and muffler type are in your hands.

So listen up and checkout this MBRP Black Series 3" Dual Cat-Back Exhaust on a 2021 LT1 Camaro. This is the main path to completing your full exhaust upgrade. And when it's time to perform maintenance that required the removal of your exhaust system make sure that you use new gaskets if your existing gaskets have too much heat damage. And check out the rest of the exhaust options to fully protect and support your exhaust beyond your cat-back setup.

These two work together to offer better flow and allow the system to breathe better. We are one of few brands that own our factory thus enabling us full control over the manufacturing process, selection of raw materials, and construction techniques. Install your IE catback without any permanent modifications or installation hassles. The installation process is straightforward and accomplished with standard mechanic tools.

Because the success of a catback exhaust system depends on various factors – like catalytic converter restrictions, engine power, etc. – there’s no easy way to calculate how much horsepower you stand to gain. If you have a restrictive exhaust, then a cat back exhaust could massively improve your car’s performance, and contrastingly, if your exhaust already flows well, then a cat-back won’t be much of an upgrade. In Colorado, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size. Converters in this catalog are based on Executive Orders issued by the California Air Resource Board and must be used in accordance with this information.

A spare set of 19″ Y-spoke alloy wheels is included in the sale, and they are shod with Bridgestone tires. The car is finished in Panther Black Metallic (80U) and features a GXP-specific front bumper cover and rear diffuser as well as a sunroof, fog lights, dual hood scoops, fender vents, and a rear spoiler. Imperfections are noted on the decklid and on a door and are also shown in the gallery. Our expansive inventory of Subaru performance parts ensures your vehicle not only performs at its peak but is also supported by our unparalleled customer service. At SubiSpeed, we understand that upgrading your Subaru is not just about selecting the right parts; it's about having a trusted partner every step of the way.

There are subtle changes on the outside to let onlookers know that this is no ordinary F-150, such as a custom dual-intake hood, a custom front fascia and grille combo, and Shelby badging. For the interior, Shelby adds carbon-fiber trim, billet racing pedals, custom floor mats, and a serialized plaque. For lean-burn spark-ignition engines, an oxidation catalyst is used in the same manner as in a diesel engine. Emissions from lean burn spark ignition engines are very similar to emissions from a diesel compression ignition engine. Upon failure, a catalytic converter can be recycled into scrap.

Exhaust systems are integral to your ride’s performance; these amalgamations of piping, mufflers, and resonators carry exhaust gasses from your vehicle’s exhaust manifolds to the tailpipe. Dual muffler section upgrade designed to bolt up to the OEM midpipe   Features Bolts on to factory midpipe! 3-inch 304 stainless steel piping Dual high-flow mufflers with straight through... Reducing back pressure is the key to improving performance with a cat-back exhaust system. By allowing exhaust gases to exit the engine and flow through the system more freely, the engine runs more efficiently. This efficiency can translate to better throttle response, increased horsepower, and even improved fuel economy in some cases.

The installation of a cat-back exhaust system is fairly easy, but this too depends on your vehicle’s make and model. But, compared to the alternative, they are the easiest way of improving your vehicle’s performance without breaking the bank. As a result, the engine gets to breathe better and so release more torque and horsepower.

A cat back exhaust system is one of the most popular aftermarket upgrades for performance-minded drivers. When deciding which type of exhaust system to choose, it is important to consider your needs and budget. If you are looking for maximum power and efficiency, a cat back exhaust may be the best option. However, if you are more concerned with cost and weight, a standard system may be a better choice. A cat back exhaust is one of the most popular upgrades for car enthusiasts.

Our exhaust system uses larger piping compared to the factory exhaust system, yet weights 5 lbs. The factory system uses 2.56" piping, which reduces to 2.36" before splitting, greatly diminishing the overall diameter of the system. Finally, our system’s 4" exhaust tips dwarf the factory 3.15" tips, giving the rear of the vehicle a sportier look. Beautifully hand-crafted T304-stainless-steel components adorn the system with stunning TIG-welding throughout.

SPD's 304 stainless high performance resonator cat-back pipe replaces your factory resonator pipe wi.. SPD's high performance stage 2 resonator cat-back pipe replaces your factory resonator pipe with a t.. We have redesigned our GX Series catback systems and will have them available to ship at the end of .. The exhaust system is one of the most important parts of any vehicle. It protects the driver and other nearby cars almost as much as the braking system does. If you want your car to take care of you, you need to take the best care of it.

As a result, the glass pack mufflers end up producing sounds that are more aggressive and louder than the straight-through muffler. This is a little bit different from most original exhaust systems. Today we’ll focus on the cat-back exhaust systems and what makes them stand out. There are the header-back, turbo-back, axle-back and cat-back systems.

It is important to note, however, that going too large may cause a dip in performance when gases pile up and exit the system slower resulting in torque, rpm, and horsepower loss. After the emissions are channeled out from the cylinders by the exhaust manifold, they are deposited into different catalytic converters. The IE Catback Exhaust System for your Audi B9/B9.5 S4 incorporates our in-house engineered DroneTrap technology to deliver a truly aggressive exhaust note without any annoying drone or rasp. Engineered with cutting-edge design features, including mandrel-bent stainless steel, TIG welding, multi-point reinforcements, and oversized quad tips. A catback exhaust system is a type of aftermarket exhaust system that replaces the muffler and tailpipe of a vehicle. It is called a "catback" system because it starts at the catalytic converter, which is located in the middle of the...

The 2024 Roush Super Duty stands as a testament to Roush Performance's dedication to engineering excellence, blending raw power with refined style. Whether it's for work or play, the Roush Super Duty promises to deliver an unparalleled driving experience, making every journey memorable. If the above ten reasons to consider a cat back exhaust system have you thinking it may be right for your car then Sandgate Auto Electrics are the people to call. Your neighbours may disagree that this is a benefit, but as we’ve mentioned earlier, and depending on your muffler choice, your vehicle will have a lot more grunt. This may well be the area you need to do the most research into and the sound quality, and type, can range drastically per system. At Walker, it's more than peace of mind in knowing we lead the industry with unparalleled level of compliance.

In addition, a cat-back exhaust can also improve your car's fuel economy. So, if you're looking for a way to get more out of your car, a cat-back exhaust is a great option. We now offer Maverick cat-back exhausts in both all-wheel drive (AWD) and front-wheel drive (FWD) configurations.

As a result, our popularity has increased, and we work tirelessly to maintain our quality systems while fulfilling orders. Please be aware that while we typically exceed our estimated wait times, we have been successfully operating for three years and no customer has ever been left without their system, or a cancellation/refund. At Rae, we are expanding our team and investing in additional resources and machines to ensure we stay at the forefront of innovation. With our ambitious plans, we are on track to meet demand and increase our inventory of premium parts by the end of the year. Please note that purchasing this product is agreeing to understand this concept. Amplify your vehicle's performance and sound with Full-Race's premium Exhaust systems - reliable power and efficiency harmonize with a brand that’s trusted for quality and performance.

Installation was easy, and the craftsmanship and welds are very high quality. Mishimoto exhausts are constructed of large diameter mandrel-bent pipes for maximum flow. Mishimoto exhausts are perfectly engineered to provide an aggressively rich tone with no annoying highway drone. In general, though, you can expect to pay anywhere from $1000 upwards for a good cat back exhaust system. That may seem like a lot of money, but keep in mind that a cat back exhaust can provide a significant boost to your car's performance and help it to stand out from the crowd. Typically a cat-back exhaust upgrade can be swapped with the original exhaust without any modifications.

By running pipes from the catalytic converter to the muffler and from the muffler to the exhaust tip, cat back exhaust systems improve exhaust gas flow, providing small performance boosts. However, your performance gains may be limited if your catalytic converter restricts gas flow, as a catback exhaust system is installed ‘downstream’ of the converter. Header-back systems are increasingly rare, namely because of modern emissions systems. Since removing your vehicle’s factory emissions components is highly illegal, the previous two options are more common. However, header-back systems are still available for some older, pre-emissions applications. In these cases, header-back systems offer more performance and volume than cat-back or axle-back systems; however, they’re also the most expensive and the most challenging to install.

These look like standard mufflers with a VERY unusual side entry rear exit configuration. Notice the heat discoloration at the intersection where the split occurs.Heat discoloration shows up where there is a flow restriction. Notice also the heat discoloration just after the pipes enter the silencers. It is AMAZING the engine makes the power it does through this congestion. Features Only 10 lbs [catless and non resonated version] 304 stainless steel piping Smooth air flow for maximum horsepower Compatible with both manual and automatic transmissions TIG welded to perfection... The main functions of exhaust systems are increasing horsepower and improving your engine sound.

The difference is that the dual exhaust system has two exhaust systems on one vehicle. Meaning, when modifying your exhaust, never start from the front of your turbocharged vehicle with a downpipe or with headers on your naturally-aspirated platform, you will create a bottleneck in the flow. By starting with a cat-back first, your exhaust gases will flow more freely if the rest of your system is stock.

Explore renowned manufacturers such as Borla, Invidia, and HKS, known for their exceptional craftsmanship and exhaust system expertise. FTSpeed's cat back exhausts are designed to perfectly fit your sports car, delivering noticeable gains in both power and aesthetics. Elevate your vehicle's performance and sound with our premium cat back exhaust systems. Cat-back exhaust systems typically feature a muffler, and sometimes not, and these will have piping that will route to your catalytic converter. The piping will have larger bends that are as straight as possible to provide an unobstructed exit path for the exhaust gases.

It typically includes a rear pipe, resonator, and muffler that all attach after the last catalytic converter. The turbo-back system is the most complete system you can buy. It replaces all of the components that the previous two systems that we’ve talked about and also upgrades the downpipe. The downpipe is the first piece of exhaust piping that comes after the turbocharger and it also houses the catalytic converters on all L15 powered 1.5T Civics and Integras. From a sound and performance perspective, you’re going to get the most of both compared to the other two versions mentioned before.

If you have modified your 4×4 with lifted, lowered, or air type suspension systems, you can opt for a specially designed cat-back system with more pipe curvature before the rear axle. This is necessary for off-roading as it allows a higher degree of wheel travel and greater clearance for reduced-height springs and airbag suspensions. The custom exhaust systems available let you pick from a selection of pipework that allows you to adjust the exhaust to suit your noise preference. Are you looking to boost the power and efficiency of your vehicle?

Follow us on Facebook, Instagram, YouTube and Twitter to stay up to date on our latest products, projects, and adventures. Join the conversation and show off your ride with #MagnaFlow for a chance to be featured. Overall, cat back systems are relatively low-maintenance and easy to keep in good working order. There are a few common problems that can occur with cat back systems, but fortunately, they are relatively easy to fix.

Stock exhaust systems do not give the deep and aggressive growl most motor enthusiasts desire. Let everyone hear you coming with an aftermarket cat-back exhaust on your Chevrolet Camaro. Your Chevrolet Camaro stock exhaust is pretty good, but its just not enough. No matter if you drive a Camaro V6, Camaro LT1 or Camaro SS Phastek has the best exhaust option for your ride! If you can't decide between an axle-back or a cat-back, checkout our blog to help you decide.

Most end up reducing performance and adding weight, or worse yet – adding cost and doing nothing at all. Find out more about this topic by reading our blog on Why Exhaust Drone Silencers Aren’t All They’re Cracked Up To Be. RealTruck is your home for the best products to outfit your build for unforgettable adventures.

Combined with our five different tip options, we've got you covered. We’ve had decades of experience perfecting exhaust style and technology and have developed custom exhaust systems considered too ‘niche’ by competitors. Many exhaust manufacturers use 400 series stainless steel to reduce costs and pad their profits. Additionally, the Maverick systems by Thermal offer a range of upgraded tip options that owners can choose from or change over time. Getting an upgraded cat-back exhaust system for your truck can enhance your performance and produce a great sound. Then there’s poor fitment and the dreaded drone that all too often accompanies aftermarket exhausts.

Federal Catalytic Converters are not legal for sale, installation or use in the state of California. It should be noted that a split system will often provide an aggressive noise increase, and some designs will split the two pipes to opposite sides of the vehicle. If you are looking to save a little money but still get most of the benefits of a cat back exhaust system, however, aluminized steel may be the way to go. Made from traditional steel that’s been coated on all sides with aluminum-silicon alloy, these systems are very strong thanks to the metallurgical bond which still provides a level of corrosion resistance. While the aluminum coating reflects heat well, the steel can corrode if the aluminum layer is chipped or scraped off. Most cat-back systems will come in either an aluminized or stainless steel version.

The amount of horsepower gained from installing a cat-back exhaust system varies by vehicle and the system’s design. However, when combined with other performance enhancements, the gains can be more significant. The primary goal of a cat-back exhaust is to reduce back pressure, allowing your engine to breathe better and operate more efficiently. The factory exhausts come in mandrel bent tubes made of stainless steel or aluminized steel. Besides offering longer durability, the construction also ensures there’s free flow of gases. To improve this, you can opt to replace some parts of the exhaust system using aftermarket performance exhaust systems.

Shelby also gives the truck some off-road chops by installing a BDS 3.0-inch lift kit, Fox 2.5-inch internal bypass dampers, and performance rear traction bars. The truck also sits on a set of 22-inch Shelby wheels wrapped in 35-inch all-terrain tires. The new 2024 Ford Shelby F-150 packs up to 785 hp, or more power than many supercars. That's with an available supercharger for the truck's 5.0-liter V-8. Buyers can also opt for a naturally aspirated version where the V-8 keeps its stock 400-hp rating.

In layman’s terms, a catback exhaust system provides a smoother, more streamlined path for exhaust gases to exit your car, allowing your engine to work more efficiently. When catalytic converters were first introduced, most vehicles used carburetors that provided a relatively rich air-fuel ratio. Oxygen (O2) levels in the exhaust stream were therefore generally insufficient for the catalytic reaction to occur efficiently.

The precious metals inside the converter, including platinum, palladium, and rhodium, are extracted. Ford Motor Company and Shelby American collaborated to create a stunning high performance concept vehicle based on the exciting and innovative Ford Mustang Mach-E GT platform. The big block Shelby Cobra is considered by many to be the most iconic American sports car in history. When GM began to work on a new big block Corvette and Ferrari increased the power of the V12 powered GTO's, Shelby and Ford Motor Company decided to shoehorn the mighty 427 FE motor into the Cobra. By combining Ford's incredible 6.7 powerstroke throttle valve delete benefits-liter Power Stroke® turbo diesel churning out 1,050 lb.-ft. Of torque with a Shelby tuned advanced off-road suspension system, the three-quarter ton truck delivers both serious off-road capabilities with best-in-class towing.

This is achieved by burning off the excess hydrocarbons which result from the extra-rich mixture required for a cold start. Slightly lean of stoichiometric, the exhaust gases from the engine contain excess oxygen, the production of NOx by the engine increases, and the efficiency of the catalyst at reducing NOx falls off rapidly. However, the conversion of HC and CO is very efficient due to the available oxygen, oxidizing to H2O and CO2. However, the efficiency of the catalyst at reducing NOx is good, and the production of NOx by the engine decreases.

Advanced 3D scanning tools and cutting-edge software provide our engineers with a high-resolution digital model of the Audi B9 S4 chassis. This data is then used to maximize the exhaust size for flow and optimize all available space for the perfect catback fitment. CORSA branded exhaust systems are backed by a Limited Lifetime warranty for as long as you own your vehicle with proof of purchase. The new exhaust sounds perfect, a marked improvement over stock. It is not too loud - I use the car as a daily driver and drive in capital beltway traffic.

A stock system is designed to reduce and if possible eliminate all the noise produced by your vehicle. Because of this, the axle-back exhaust system does not impact the flow or pressure of the exhaust gases in any way. The axle-back exhaust system uses the factory exhaust pipe which does not have a large diameter. This offers even more breathing space for the engine thus better performance. Most cat-back exhaust systems are customized and not universal. One is to replace specific parts like with cat-back exhaust systems.

Brands like Invidia, Borla, and Agency Power offer a wide range of options, allowing you to customize the sound and performance to suit your preferences. Upgrade your Subaru WRX, STI, Forester, and Crosstrek with these cat back exhausts to unlock additional horsepower, torque, and an exhilarating driving experience. Catback exhaust systems are typically made up of a rear pipe, a resonator and a muffler, though they can also include a mid-pipe, x-pipe, h-pipe or y-pipe, depending on the make and model. Upgrade the sound and performance of your 1990 toyota pickup exhaust Supra, GR86, or Subaru BRZ with a high-quality cat back exhaust system from FTSpeed. Our cat back exhausts are engineered to enhance exhaust flow, resulting in improved horsepower, torque, and throttle response. With a deep and aggressive tone, these exhaust systems not only amplify the sporty character of your vehicle but also provide a captivating driving experience.

You’ll save right away when you add a front-pipe and a downpipe to your base system over buying each of these individually. Many car fanatics love a unique sound for their ride, almost similar to a racecar. It’s no secret that the standard vehicle exhaust system won’t produce a roaring or distinguishable sound. This is where a back cat exhaust system will be favorable to any motorist. The upgraded system will give you a more enjoyable, louder ride. But this is where certain systems will do better than others, so be sure to look into which one will be right for you.

CORSA exhaust parts, hardware and detailed instructions are included in each kit so you can get on the road as fast as possible. We hope this article has provided a thorough answer to the question of what is a catback exhaust and provided advice on how they can help improve the performance of your car. While they may not provide a big performance boost for all cars, cat-back exhausts are a simple and effective way to improve gas flow in your exhaust system beyond what stock exhausts are capable of. Catalyst poisoning occurs when the catalytic converter is exposed to exhaust containing substances that coat the working surfaces, so that they cannot contact and react with the exhaust. The most notable contaminant is lead, so vehicles equipped with catalytic converters can run only on unleaded fuel.

The new Large Bore-HD exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4" stainless steel tubing for maximum flow, increased horsepower, increased torque and lower EGT's. This system is available in 4" cat-back with muffler. Large Bore-HD exhaust systems are the perfect combination of performance, fit and value. For over 40 years, MagnaFlow has maintained its position at the forefront of high-end catalytic converter and performance exhaust manufacturing. MagnaFlow stands by its products with industry-leading warranties in service of its mission to provide the highest quality exhaust experience from start to finish.

One main reason for choosing to remain with a stock system is because it comes already installed on your vehicle. You should know the difference between a dual exhaust and a dual exit exhaust system. But it is easy to mistake a dual exit exhaust for a dual exhaust system. The materials are often 304 stainless steel or aluminized steel. The stainless steel is usually coated in special metals that make it corrosion-resistant. This means there will be a reduction in the amount of load on the engine, leading to higher mpg and fuel efficiency.

Video Features Options Short video of our 3" Catback Exhaust for the 07+ Honda Civic Si Sedan. Note that this was installed on a naturally aspirated setup (stock header and... Already own an Ultimate Racing Performance Muffler and want to upgrade to a full Catback system. For information about our other auto repair services, please refer to our comprehensive guide. But both cons of a resonator are not present with a cat-back exhaust system. For the noises that the muffler fails to get rid of, the resonator eliminates them. As a result, they are fitted with both a muffler and a resonator.

Dual Magnaflow wide open mufflers with quad 3.5" exhaust tips, slightly louder and deeper than standard Borla. This upgrade option retains the large Borla resonator and replaces Borla mufflers with dual Magnaflow mufflers and quad tips. Borla is a great exhaust, but with this upgrade your back will look much better with the large aggressive oval quad tips and will sound better too! Cat-back exhaust systems refer to all of the components that exhaust gasses flow through after exiting the vehicle’s catalytic converter.

A dual exit on the other hand, is just a single exhaust system but with two exhaust tips. This is because, with a cat-back exhaust system, you will experience a significant increase in your fuel economy. The tone provided by different cat-back exhaust systems varies from one system to another.